■Flow rate:Q=10~5000(m³/h)
■Total head:H=20~120 (m)
■Speed:n=490~2900rpm
■S.g.:γ ≤1.5
■Temperature:T=0~120℃
■Pump diameter:50~450mm
■Optimized solid and liquid hydraulic model design of high efficiency and energy-saving.
■Thickened wetted parts design to improve the anti-abrasive ability and prolong pump life.
■Heavy duty shaft design,with better performance in strength.
■Reasonable bearing configuration and fully lubricated design ensures the long time and continuous operation.
■Suitable to pump corrosive or abrasive slurries contains solids,the mixture density of solids and liquid can be up to 60%.
■Various sealing types to meet different requirements.
■According to the requirements of clients,it can work in series.
■Axial split bracket and double layer casing structure.
■Outer casing is vertical split structure;pump outlet is able to be set on 8 different direction at 45° interval.
■Horizontal installation of big loading capacity.
■The jacket and guard plate as the lining,pump casing and pump cover is the frame.
■Shaft sealings: dynamic seal,packing seal and mechanical seal.
■Transmission: Direct coupled,V-belt drive,variable frequency drive,hydraulic coupling.
Structure drawing is as below
■Material of flow passage components based on pumped medium: Cr26 wear-resistant material, or Cr30, CD4MCu wear-resistant and anti-corrosion material, and other general wear-resistant material.
■Material of pump casing, pump cover, bracket etc. supporting parts: gray cast iron
■Mineral separation and tailings slurry conveying.
■Slurry conveying during the producing process of aluminum oxide.
■Conveying sewage contains solids in industries of thermal power,cement,steel,non-ferrous metal...
■Sewage and slurry conveying of other industries.