■The hydraulic model is optimized by CFD,with excellent anti-cavitation performance.

■Elaborate design and manufacturing based on the fluid requirements of ammonium phosphate and potash fertilizer process,is able to satisfy various capacity requirements.

■The rotor part can be adjusted by the bearing housing,which enables the convenient method to recover the pump performance after slight abrasion of pump.

■Axial direction adjustable rotor part. The gap between the impeller and the front cover can be adjusted to enable stable operation at high efficiency.

■Pump diameter from 200 mm to 900 mm.A lot of real sales achievements for each specification.

■The discharge direction can be customized based on the requirements of process.

■Horizontal,single stage,single suction,cantilever type,volute casing,direct coupled transmission.

■Back pull design. During maintenance,the rotor part plus the pump rear cover can be pulled out from the casing without dismantle the inlet and outlet pipes.

■Pump shaft sealing consists of dynamic seal and packing.

■Bearing housing is back pull structure,and connected to pump casing by pump rear cover.

Structure drawing is as below:

■Fluid circulation of ammonium phosphate and potash fertilizer process.

■Forced circulation of big flow of corrosive fluids with suspending particles.