■Flow rate:Q=126~7590m3/h
■Total head:H=9~140m
■Speed:n=585rpm/2950rpm
■S.g.:γ ≤1.15
■Temperature:T=-0~80℃
■Pump diameter:150~800mm
■Adopted excellent hydraulic models of high efficiency and high reliability.
■Axial split casing structure enables easy inspection and maintenance.
■Pump inlet and outlet are both horizontal and are perpendicular to pump shaft,which provides the convenience of pipeline arrangement.
■Double suction impeller of symmetrical structure,which eliminated the axial forces.
■Both pump inlet and outlet are beneath the centerline of pump,axial split casing structure enables easy inspection and maintenance.
■Viewed from the driving end,S series is clockwise rotation,SH series is counterclockwise rotation.
tructure,the ends of shaft are supported by bearings.
Structure drawing is as blow
1. Bearing and bearing casing 2. Pump casing 3. Shaft 4. Seal ring 5. Impeller 6. Pump casing 7. Shaft sleeve 8. Filler
■Gray iron
■Spheroidal graphite cast iron
■Cast steel
■It is suitable to pump clean water and fluids have close physical and chemical characters of water.
■widely used in sections of mining,city water supply,power plant water supply and drainage,farm irrigation and various water conservancy project.
欢迎使用ueditor!